Vacuum devices
Reasons for using vacuum for injection moulding:
- No air inclusions
- No burnings (Diesel effect)
- No burr formation
- Maximized flow paths
- Reduced injection pressure
- Lower tool strain
- Unfalsified illustration of the cavity surface
Gammavac 15
| Pump: |
P6010 Si32-3X4 |
| Air (compressed air): |
4-6bar (1/2" Mindestdurchlass 9mm) |
| Tank content: |
0 - 10 Liter (2 litres modular) depending on use |
| Dimensions: |
500x300x450 mm (WxHxD) |
| Weight: |
21kg without tank |
| Vacuum connections: |
1" (free passageway, min. 24mm) |
| Vacuum measurement line: |
3mm Test 15 (keep measuring line as short as possible) |
| Interface: |
Potential free |
| Operation: |
Command over button |
| Connection: |
230V, 50/60 Hz, 1.0A |
Gammavac 25
| Pump: |
P6010 Si32-3X4 |
| Air (compressed air): |
4-6bar (1/2" Mindestdurchlass 9mm) |
| Tank content: |
0 - 10 Liter (2 litres modular) depending on use |
| Dimensions: |
500x300x450 mm (WxHxD) |
| Weight: |
22kg without tank |
| Vacuum connections: |
1" (free passageway, min. 24mm) |
| Vacuum measurement line: |
3mm Test 15 (keep measuring line as short as possible) |
| Interface: |
Potential free (EUROMAP optional) |
| Operation: |
Touchscreen |
| Connection: |
230V, 50/60 Hz, 1.0A |
